Interactive pen display Contents Index 2 Interactive pen display User’s Manual Version 2.0, Rev A2510 Copyright © Wacom Co., Ltd., 2010 All rights reserved. No part of this manual may be reproduced except for your express personal use.

Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. However, Wacom reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual.

Work Fujitsu Wacom Dtu-2231 Tablet Driver 6.3.20-4 For Mac

The above year indicates when this manual was prepared. However, the date of release to the users of the “manual” is simultaneous with the introduction into the market of the applicable Wacom product.

DuoSwitch is a trademark, and Wacom is a registered trademark of Wacom Co., Ltd. Adobe and Reader are either registered trademarks or trademarks of Adobe systems Incorporated in the United States and/or other countries. Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. And other countries. Any additional company and product names mentioned in this documentation may be trademarked and/or registered as trademarks. Mention of third-partyproducts is for informational purposes only and constitutes neither an endorsement nor a recommendation.

Wacom assumes no responsibility with regard to the performance or use of these products. Contents Index. Product specifications 67 Model DTU-2231 interactive pen display 67 General specifications, DTU-2231 67 Display, DTU-2231 68 Tablet, DTU-2231 69 Power adapter, DTU-2231 69 Model DTU-1631 interactive pen display 70 General specifications, DTU-1631 70 Display, DTU-1631 71 Tablet, DTU-1631 72 Power adapter, DTU-1631 72 Pen (model UP-817E) 72 Pen (model UP-818E) 72 Product information 73 Ordering parts and accessories 73 Available parts and accessories 73 Radio and television interference 74 FCC notice 74 Industry Canada (Canada only) 75 CE declaration 75 Contents Index. Interactive pen display Contents Index 5 ABOUT THE MANUAL This document provides quick access to information about your interactive pen display.

Click on a navigation button or highlighted word to move through the document. The information is common to Windows and Macintosh computers and Windows screen captures are shown, unless otherwise noted. If you are new to electronic documentation, read navigating the manual. Go directly to contents or index topics by clicking on them. S MALL CAPITAL LETTERS identify the names of keyboard keys, dialog boxes, and control panel options. You can use your viewer zoom-intool to increase the size of the page on your display screen.

The following information is not included with this product: information about your specific computer hardware or operating system, or information about your application software. Your best source for this information is the set of manuals and discs that came with your hardware, operating system, or application.

Many applications have built-insupport for pen display features (such as pressure sensitivity). Visit Wacom’s web site to find a listing of applications that support these features (see product information). For information on how best to use pen display features within a specific application, see the instructions in that application’s manuals.

Wacom’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications, and improvements may not be covered in this document. Contents Index. Interactive pen display Contents Index 7 YOUR INTERACTIVE PEN DISPLAY This manual describes the installation and use of your interactive pen display. The Wacom Tablet control panel enables you to customize your pen and pen display settings.

To learn more, see customizing. Pen display features Adjusting display incline Pen features The following information is not included with this product: information about your specific computer hardware or operating system, or information about your application software. Your best source for this information is the set of manuals and discs that came with your hardware, operating system, or application. Note: Not all product models are available in all regions. Contents Index. Interactive pen display Contents Index 8 PEN DISPLAY FEATURES Familiarize yourself with the features and components of your product.

FRONT VIEW On Screen Display (OSD) controls Use to adjust the display settings. See adjusting the display.

Status LED Lights blue when pen is in active area of the pen display and the pen tip is pressed. LED will not light unless the USB cable is plugged into an active USB port. Power switch Turns unit on or off. Power LED Lights blue when power has been supplied to pen display and a video signal is present. Glows orange when no video signal is detected. (e.g., Your computer is turned off, starting up, or has entered a power management mode in which video signals are not sent.) USB ports (one on each side of unit) For external USB devices, such as a flash drive. Fully install the pen display hardware and software before connecting any devices.

Contents Index. Interactive pen display Contents Index 9 REAR VIEW Security slot Pen storage compartment Allows easy attachment Store by inserting one end of the pen into either side of the of a security cable. Then gently press other end of pen into the compartment. Take care not to damage the pen nib. Remove by pressing in on either end of the pen to eject opposite end from the compartment. Grasp pen and remove.

Stand adjustment lever Connection panel. Power connector.

DVI/VGA (digital/analog) switch. Be sure to set for the video connection you will be using. Applies to the input and output video connections. DVI-Iout connector. DVI-Iin connector. USB connector Pen tether attachment point If using a pen tether, connect it to an attachment point located on either side of unit. Display stand Adjusts the tilt angle of the unit.

See adjusting display incline. Important: Do not lift the unit by the stand; this may damage the stand mechanism.

When lifting or moving the pen display, always do so by grasping the main body casing. Always store the interactive pen display on a stable surface or in its original packing carton when not in use. Be sure to adjust the stand to the low tilt position before packaging. If you do not close the stand, the notched mechanism may be damaged during transportation and storage.

Contents Index. Interactive pen display Contents Index 11 PEN FEATURES Eraser: When brought within proximity of the pen display (5 mm (0.2 inch)), the tablet portion of the display reports the pen location. Pressure information is reported as you press down on the eraser. By default, the eraser function is set to E RASE. Some pens may be configured with a pen tether connection point. DuoSwitch (side switch): Be sure the programmable switch is in a convenient location where you can toggle it with your thumb or forefinger but not accidentally press it while using the pen. You can use the switch whenever the pen tip is within proximity of the display screen surface; you do not need to touch the pen tip to the display surface.

Toggle the switch in either direction to activate the button functions. By default, the upper switch is set to D OUBLE C LICK and the lower switch is set to R IGHT C LICK.

Pen tip (replaceable nib): The pen is activated as soon as it is brought within proximity (5 mm (0.2 inch)) of the pen display screen. This allows you to position the screen cursor without touching the pen tip to the display screen. When pressure is applied to the pen tip, the pen simulates a primary mouse button click. Tip click pressure can be adjusted in the Wacom Tablet control panel. Notes: When not in use, place the pen in the pen storage compartment or lay it flat on your desk. To maintain the sensitivity of your pen, do not store the pen in a container where it will rest on its tip.

Some product configurations may come with a pen that has no DuoSwitch or eraser. In that case, you can ignore all explanations within this guide regarding the side switch or eraser.

Important: Use only a pen specified for use with your pen display. Other pens may not function properly. Also, the pen tip is specifically designed for use with the pen display.

If your pen display has a coated surface, the tips on other pens could damage the pen display screen. Contents Index. Interactive pen display Contents Index 12 INSTALLATION The computer treats the interactive pen display as two separate devices (the display and the pen tablet). Therefore, the installation process is completed in two stages:.

First install as a display. Then install as a pen tablet. Both stages require hardware and software installations and adjustments. Carefully follow ALL instructions. Important: You MUST install the Wacom driver software for correct pen-on-screenfunctionality. System requirements Step 1: Display installation Step 2: Pen tablet installation SYSTEM REQUIREMENTS Make sure your computer meets the following minimum system requirements:.

PC. Windows 7, Vista ™, XP (32 and 64 bit). DVI or VGA connector, available USB port, and CD-ROMdrive. OS X, v10.4 or greater.

Good deal free shipping original for mac. DVI or VGA connector, or Apple Mini DisplayPort to Dual-LinkDVI adapter, available USB port, and CD-ROMdrive. The pen display supports both digital (DVI) and analog (VGA) video signals.

If updating your video card, first complete the video card installation before connecting the pen display. If you have another display that is compatible with your video card, you can use that display to verify the video card is operating correctly. Although you can connect the pen display to either a DVI or VGA video card, connecting to a DVI video card generally results in optimum performance. Notes: You may be able to set up the pen display as a mirrored, extended, or independent display. When working with more than one monitor, the pen display will map to the monitors based upon how your system is configured.

By default, if you are in mirror mode, the pen display will map to the entire space on each monitor. See your hardware and operating system documentation for details on configuring your system for use with multiple monitors.

A Display Toggle function is available for use with multiple monitor systems. This enables you to toggle the screen cursor between the pen display and your other monitors. The pen display can be used alone or with another display. You may connect a second device, such as a monitor or LCD projector, to the DVI-I OUT port. When using this port, the second device will mirror the image on the pen display. Complete the pen display installation before connecting another device to the unit. Contents Index.

Interactive pen display Contents Index 13 STEP 1: DISPLAY INSTALLATION In this step, the interactive pen display is installed as a monitor on your system. Important: Do not connect the USB data cable until instructed to do so. Never connect or disconnect the video or power cables while your computer or pen display are powered on. This can damage the display or video card. Turn off your computer.

If your computer has only one video connector, unplug your previous monitor or add a second video card. Determine if your computer has a digital (DVI) or analog (VGA) connector and set the DVI/VGA switch for the video connection you are using. See – A – in the connection diagram. Making sure to tighten the connector thumbscrews, follow the below instructions for your video connector. See – B – in the connection diagram. For DVI operation, connect the supplied DVI-Dto DVI-Ivideo cable between the DVI-I IN connector located on the pen display unit and the DVI connector on your video card.

For VGA operation, connect the supplied VGA to DVI-Icable between the DVI IN connector located on the pen display unit and the VGA connector on your video card. If connecting to a Mac Mini DisplayPort, you will need to obtain an appropriate adapter. For best results the Apple Mini DisplayPort to Dual-LinkDVI Adapter is recommended. Adapters can be purchased at various retail outlets and through the online Apple Store.

Connect the adapter between the pen display DVI cable and your Macintosh. Interactive pen display Contents Index 15 7.

Next, turn on your computer. For Windows: The interactive pen display will automatically install as a default monitor. (Some models may not include a color profile.) To identify the unit as a pen display and install the color calibration profile: A) Open the system C ONTROL P ANEL folder. For Windows 7 and Vista, under APPEARANCE AND PERSONALIZATION select ADJUST SCREEN RESOLUTION. For Windows XP, open the D ISPLAY P ROPERTIES control panel and select the S ETTINGS tab.

If you have more than one monitor, click I DENTIFY MONITORS to determine which display corresponds to the pen display. Select the number corresponding to the pen display. B) Click ADVANCED SETTINGS. C) Select the M ONITOR tab and click P ROPERTIES. D) Select the D RIVER tab and click U PDATE D RIVER. An update driver dialog or Wizard will appear. E) Insert the Installation CD.

If the Wacom Tablet installation menu displays, close it. Windows 7 and Vista:. Select BROWSE MY COMPUTER FOR DRIVER SOFTWARE. Enter the drive letter for the Installation CD and click N EXT. After installation is complete, close any open control panel windows.

Windows XP:. The Wizard will ask if Windows can search for software. Choose N O, NOT THIS TIME and click NEXT. Select INSTALL FROM A LIST OR SPECIFIC LOCATION (ADVANCED ), and click NEXT. Select DON ’T SEARCH. I WILL CHOOSE THE DRIVER TO INSTALL and click NEXT.

Select the pen display option and click H AVE D ISK. Enter the letter of your CD-ROMdrive (e.g., E: ), and click OK. Follow the prompts. (If the H ARDWARE I NSTALLATION dialog box displays, click C ONTINUE A NYWAY.) After installation is complete, click F INISH and close any open control panel windows.

For Macintosh, a color profile is added to your color management system during the driver software installation process. (Some models may not include a color profile.) To activate this color profile for use with the pen display, you may need to select the pen display profile in the system’s ColorSync Utility control panel. For details, see the color management information in your operating system and application documentation.

Contents Index. Interactive pen display Contents Index 18 SOFTWARE INSTALLATION Important: You MUST install the Wacom driver software for correct pen-on-screenfunctionality. Save your work and close all open applications.

Temporarily disable any virus protection programs. Insert the Installation CD into your computer’s CD-ROMdrive. If the software installer menu does not automatically display, double-clickon the I NSTALL icon located on the CD. (You can also download and install the latest software driver, when available, from the Wacom web site for your region.). Click I NSTALL T ABLET and follow the prompts to install the driver software.

Reactivate your virus protection program. After completing the software installation, make sure you can use your pen on the interactive pen display to move the screen cursor. When you place the pen tip on the display screen, the screen cursor should immediately jump to a corresponding position approximately beneath the pen tip.

Lift the pen tip and place it on the display screen surface in a different location. The screen cursor should again jump to the new position. This is known as absolute positioning, and enables you to position the screen cursor without having to drag your pen across the display screen surface. Be sure to check the Read Me file for updated information. If you have trouble installing the pen display, see troubleshooting. Notes: Driver installation automatically activates the new pen input functions available within Microsoft Windows 7, Vista, and Office 2007 or later (except for Windows 7 Starter and Home Basic, and Windows Vista Home Basic). Visit the Wacom web site at www.wacom.com/vista for additional information on using your Wacom pen in Windows.

User-specificpreferences are supported. After logging in, each user can customize their personal settings in the Wacom Tablet control panel. Switching to another user will automatically load the settings for that user. To uninstall the software driver, see uninstalling the interactive pen display. If the pen display does not respond properly or you lose cursor control, the pen display preferences may be corrupted. You can delete the current preference settings and return the pen display to its factory default condition. See managing preferences.

Next, see calibrating the pen display to precisely align the screen cursor to the pen tip. Contents Index.

Interactive pen display Contents Index 19 WORKING WITH THE INTERACTIVE PEN DISPLAY As you work with the pen display you can rest your hand lightly on the display screen, just as if it were a sheet of paper. Because the pen display surface will be a little higher than your desk, consider adjusting the height of your desk or chair to assure comfortable use of the device. Ergonomics Using the pen Working with multiple monitors Adjusting the display ERGONOMICS To minimize fatigue, comfortably organize your work area. Position your pen display, the pen, and your keyboard for easy access without unnecessary reaching.

The pen display and any other displays should be positioned so you can view them comfortably with a minimum of eyestrain. Take short breaks between tasks to stretch and relax your muscles. Use a gentle grip when working with the pen. Alternate tasks throughout the day. Maintain a good posture at all times. Minimize awkward postures and repetitive movements that cause discomfort. Change your position if you feel any discomfort due to your work position.

Note regarding RSI: Wacom makes no representation, promise or guarantee that Wacom products will cure or prevent, in whole or in part, mouse-inducedrepetitive stress symptoms, injuries or conditions. Individual results may vary. Always obtain competent medical advice to determine the most appropriate treatment for your specific situation. Tips: Be careful that you do not pull the cables out of their connections by accidentally moving the pen display too far from the computer. The pen tether can be used to ensure your pen stays with your pen display.

Simply loop one end of the tether through the tether hole located on the pen (if so equipped), and the other end of the tether through the tether connection point located on either side of the pen display. The pen display can also be mounted to articulated arms or other third-partystands meeting the VESA specification for display stands. For details, see using an alternate mount or stand. Contents Index. Interactive pen display Contents Index 20 USING THE PEN The pen is cordless, battery-free,and senses the amount of pressure you apply to the tip. Holding the pen Positioning Clicking Dragging Using the side switch Working with pressure sensitivity Erasing HOLDING THE PEN Hold the pen like you would a normal pen or pencil.

As you work with the interactive pen display you can rest your hand lightly on the display screen. You can tilt the pen in any way that feels most comfortable.

For information on changing the pen settings, see customizing. POSITIONING To position the screen cursor, move the pen slightly above the pen display screen without touching the screen surface. Press the pen tip on the display screen to make a selection. Note: Calibrating the pen display ensures correct alignment of the screen cursor with the pen tip. If the screen cursor does not jump to a position near the pen tip when you place the pen on the display screen, then the pen display software driver may not be installed or is not loading.

Install the driver software if necessary. Otherwise, see troubleshooting. Contents Index.